Beam Clamps

#159 Beam Clamp Figure #159 ADJUSTABLE ROD BEAM CLAMP
SIZE RANGE: 3/8" through 5/8" rod size
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 27)
SERVICE: For suspension of hanger rod from an "I" beam. Flange widths 4" to 8" maximum.
ORDERING: Specify rod size, figure number, name and finish

#201 Stamped C Clamp Figure #201 STAMPED "C" CLAMP
SIZE RANGE: 3/8" through 7/8" rod size
MATERIAL: Carbon Steel
STANDARD FINISH: Electro-Plated Zinc
APPROVALS: (3/8" and 1/2")UL, cUL, and FM for 4" IP Max. (Mild Steel Only)
Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 23)
SERVICE: Designed for fastening to beam flange where thickness does not exceed 3/4 inch
ORDERING: Specify rod size, figure number, name and finish

#301 C-Clamp Figure #301 "C" CLAMP
SIZE RANGE: 3/8" through 3/4"
MATERIAL: Malleable Iron c/w hardened steel set screw
STANDARD FINISH: Bare Metal
APPROVALS: (3/8" and 1/2")UL, cUL, and FM for 4" IP Max.
Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 23)
SERVICE: For attachment to American Standard I-Beams and wide flange beams where thickness does not exceed 3/4 inch.
ORDERING: Specify rod size, figure number, name and finish

#404 Purlin Clamp Figure #404 PURLIN CLAMP
SIZE RANGE: 3/8" rod size
MATERIAL: Malleable Iron c/w hardened steel cup point
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 23)
SERVICE: Designed for use with large-lip rolled steel purlins to
eliminate the need to modify steel purlin for standard C Clamp
ORDERING: Specify rod size, figure number, name and finish

#405 Insulator Support Figure #405 INSULATOR SUPPORT
SIZE RANGE: 1/4" through 3/8"
MATERIAL: Malleable Iron
STANDARD FINISH: Electro-Plated Zinc
SERVICE: Designed to attach hanger rod to beam or framework where thickness
does not excess 1/2 inch. Rod tap on both bottom and back of clamp.
ORDERING: Specify rod size, figure number, name and finish

#406 Small Mouth Top Beam Clamp Figure #406 SMALL MOUTH TOP BEAM CLAMP
SIZE RANGE: 3/8" through 7/8"
MATERIAL: Malleable Iron c/w hardened steel set screw
STANDARD FINISH: Bare Metal
APPROVALS: CUL, FM for 3/8", CUL for 1/2" (4" I.P. Max.), cUL for 3/8" and 1/2" S/S
Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 19)
SERVICE: For use under roof installations with bar joist construction where thickness of joist does not exceed 5/8 inch.
ORDERING: Specify rod size, figure number, name and finish

#407 Wide Mouth Top Beam Figure #407 WIDE MOUTH TOP BEAM CLAMP
SIZE RANGE: 3/8" through 3/4"
MATERIAL: Malleable Iron c/w hardened steel set screw
STANDARD FINISH: Bare Metal
APPROVALS: CUL, FM for 3/8", CUL for 1/2" (4" I.P. Max.) (Malleable Iron Only)
Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 19)
SERVICE: For under roof installations with bar joist construction, or attaching to top flange of structural shapes.
ORDERING: Specify rod size, figure number, name and finish

#410 Beam Clamp Figure #410 MALLEABLE BEAM CLAMP (order extension piece separately Fig#411)
SIZE RANGE: Accommodates Flange Widths of 2 3/8" through 7"
MATERIAL: Malleable Iron Jaw, Carbon Steel Hardware
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 30)
when used with Fig# 411 Extension Piece
SERVICE: For attaching a hanger rod to the bottom flange of a beam. Flange thickness not to exceed 0.60"
ORDERING: Specify figure number, name and finish

#416 Retaining Strap Figure #416 RETAINING STRAP
SIZE RANGE: 6" through 12"
MATERIAL: Carbon Steel
STANDARD FINISH: Pre-Galvanized
SERVICE: Designed for use with top beam clamps
ORDERING: Specify size, figure number, name and finish

#425 Beam Clamp Figure #425 BEAM CLAMP (order Fig#64 Weldless Eye Nut separately)
SIZE RANGE: 4" through 10" Flange Width
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 21)
SERVICE: For attaching a hanger rod centered under beam flanges.
ORDERING: Specify flange width, flange thickness, figure number, name and finish

#426 Beam Clamp Figure #426 BEAM CLAMP
SIZE RANGE: 4" through 8" Flange Width
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: For attaching a hanger rod centered under beam flanges.
ORDERING: Specify flange width, flange thickness, figure number, name and finish

#450 Beam Clamp Figure #450 HEAVY BEAM CLAMP ASSEMBLY (order Fig#64 Weldless Eye Nut separately)
SIZE RANGE: 3" through 16" Flange Width
MATERIAL: ASTM A-36 Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 28 without links, Type 29 with links)
SERVICE: Designed for suspending heavy loads from beams up to 16" wide and 1" thick.
ORDERING: Specify clamp size, figure number, rod size and finish