Clevis Hangers

Clevis Hanger Figure #22Z CLEVIS HANGER ZINC - LIGHT DUTY
SIZE RANGE: 1/2" through 4"
MATERIAL: Carbon Steel
STANDARD FINISH: Electro-Plated Zinc
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 1)
SERVICE: Recommended for the suspension of non-insulated, stationary pipe lines allowing for vertical adjustment.
ORDERING: Specify pipe size, figure number, name and finish
ALSO AVAILABLE IN: Stainless Steel


Clevis Hanger Figure #24Z CLEVIS HANGER ZINC
SIZE RANGE: 1/2" through 36"
MATERIAL: Carbon Steel
STANDARD FINISH: Electro-Plated Zinc
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 1)
cUL Approved (2 1/2" through 8"- Mild Steel and S/S), FM Approved (3/4" through 8"- Mild Steel)
SERVICE: Recommended for the suspension of non-insulated, stationary pipe lines allowing for vertical adjustment.
ORDERING: Specify pipe size, figure number, name and finish
ALSO AVAILABLE IN: Bare Metal, Stainless Steel, Hot-Dip Galvanized, and Epoxy Coated


#24L Extended Clevis Hanger Figure #24L CLEVIS HANGER - EXTENDED
SIZE RANGE: 3/4" through 12"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 1)
SERVICE: Recommended for the suspension of insulated stationary pipe lines allowing for vertical adjustment.
ORDERING: Specify pipe size, figure number, name and finish


#25 MJHanger Figure #25 MJ HANGER
SIZE RANGE: 2" through 6"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: Designed for the suspension of no hub or service weight cast iron pipe.
ORDERING: Specify pipe size, figure number, and name.

#27AC Clevis Hanger Figure #27AC AWWA CLEVIS HANGER - FOR AWWA CAST or DUCTILE IRON PIPE and AC/TRANSITE PIPE
SIZE RANGE: 3" through 24"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 1)
ORDERING: Specify pipe size, figure number, name and finish


#52 Clevis Hanger Copper-Gard Figure #52 CLEVIS HANGER - COPPER GARD
SIZE RANGE: 1/2" through 6"
MATERIAL: Carbon Steel
STANDARD FINISH: Epoxy Coated Copper-Gard c/w Zinc Hardware
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 1)
SERVICE: Recommended for the suspension of copper tubing, stationary pipe lines allowing for vertical adjustment.
ORDERING: Specify pipe size, figure number, and name.