Pipe/Riser Clamps

2-Bolt Pipe Clamp Figure #31Z 2-BOLT PIPE CLAMP ZINC
SIZE RANGE: 1/2" through 36"
MATERIAL: Carbon Steel
STANDARD FINISH: Electro-Plated Zinc
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 4)
SERVICE: Recommended for the suspension of non-insulated pipe lines
ORDERING: Specify pipe size, figure number, name and finish

Heavy 2-Bolt Pipe Clamp Figure #31H HEAVY 2-BOLT PIPE CLAMP
SIZE RANGE: 3" through 42"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 4)
SERVICE: Recommended for the suspension of heavy loads where little or no insulation is required.
ORDERING: Specify pipe size, figure number, name and finish

3-Bolt Pipe Clamp Figure #33M 3-BOLT PIPE CLAMP
SIZE RANGE: 1/2" through 36"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 3)
SERVICE: For the suspension of insulated pipe lines. Normally used with weldless eye nut Fig.64
ORDERING: Specify pipe size, figure number, name and finish

ALLOY 3-Bolt Pipe Clamp Figure #33A ALLOY 3-BOLT PIPE CLAMP
SIZE RANGE: 1 1/2" through 24"
MATERIAL: Chrome Molybdenum Steel (ASTM A 387 Grade 22)
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 3)
SERVICE: For the suspension of high temperature pipe requiring insulation.
ORDERING: Specify pipe size, figure number, name and finish

HEAVY 3-Bolt Pipe Clamp Figure #33H HEAVY 3-BOLT PIPE CLAMP
SIZE RANGE: 4" through 36"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 3)
SERVICE: For supporting pipe up to 4" of insulation.
ORDERING: Specify pipe size, figure number, name and finish

Underground Bell Clamp Figure #35 UNDERGROUND BELL CLAMP
SIZE RANGE: 3" through 24"
MATERIAL: Carbon Steel Clamp, Cast Iron Washer
STANDARD FINISH: Bare Metal
SERVICE: Recommended as a safety device on underground AWWA ductile iron pipe. This added reinforcement is necessary in any case of reversal, stoppage, or change in direction of flow
ORDERING: Specify pipe size, figure number, name and finish

Hinged Split Ring Hanger Figure #38R HINGED SPLIT RING HANGER
SIZE RANGE:3/8" through 4"
MATERIAL: Malleable Iron
STANDARD FINISH: Electro-Plated Zinc
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 12)
SERVICE: For suspension of non-insulated stationary pipe
ORDERING: Specify pipe size, figure number, name and finish

S/S Split Ring Hanger Figure #38R S/S SPLIT RING HANGER
SIZE RANGE:3/8" through 4"
MATERIAL: 304 (SS4) and 316 (SS6) Stainless Steel
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 12)
SERVICE: For suspension of non-insulated stationary pipe and where protection from corrosive environments is needed.
ORDERING: Specify pipe size, figure number, name and type

Hinged Split Ring Hanger Figure #38C HINGED SPLIT RING HANGER - Copper-Gard
SIZE RANGE:3/8" through 4"
MATERIAL: Malleable Iron
STANDARD FINISH: Epoxy Coated Copper-Gard c/w Zinc Hardware
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 12)
SERVICE: For suspension of non-insulated stationary pipe
ORDERING: Specify pipe size, figure number, name and finish

#BISMAT 5000 Rubber Lined Clamp Bismat® 5000 Rubber Lined Clamp
SIZE RANGE: For Iron Pipe and Copper Tubing - See Sizing Chart on Specification Sheet
MATERIAL: Electro-Plated Mild Steel and EPDM (ethylene propylene diene monomer) Rubber Liner
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 12)
SERVICE: Easy-Close mechanism in this versatile EPDM rubber lined clamp. Saves installation time and effort, prevents vibration, noise, and metal to metal contact.
ORDERING: Specify Name, copper or iron pipe size.


#40 Split Ring Hanger Figure #40 SPLIT RING HANGER
SIZE RANGE: For Iron Pipe and Copper Tubing - See Sizing Chart on Specification Sheet
MATERIAL: Electro-Plated Zinc Mild Steel and EPDM (ethylene propylene diene monomer) Rubber Liner
SERVICE: For suspension of insulated and non-insulated pipe lines.
ORDERING: Specify name, figure munber, pipe type, and size.

Manhole Drop Pipe Clamp Figure #47, 48, 49 MANHOLE DROP PIPE CLAMP
SIZE RANGE: 4" through 12"
MATERIAL: Stainless Steel Type 304.
SERVICE: Designed for easy installation and support of manhole drop pipe.
ORDERING: Specify size, figure number and name.

#starQuick® starQuick® SELF-LOCKING PIPE CLAMP (Featured on )
SIZE RANGE: 1/4" through 2" Copper Tube and Iron Pipe
MATERIAL: UV-stabilized Polymer
APPROVALS: UL Listed, ASTM E-84-plenum rated
SERVICE: Time and cost saving solution for pipe fixing due to self-locking attribute.
ORDERING: Specify part number, pipe size, and name.

Riser Clamp Figure #82Z RISER CLAMP ZINC
SIZE RANGE: 1/2" through 36"
MATERIAL: Carbon Steel
STANDARD FINISH: Electro-Plated Zinc
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 8)
UL, and cUL Approved (2" through 8")
SERVICE: For the support and stabilizing of vertical pipe runs
ORDERING: Specify pipe size, figure number, name and finish

Riser Clamp Figure #82SS RISER CLAMP - STAINLESS STEEL
SIZE RANGE: 1/2" through 36"
MATERIAL: 304SS & 316SS
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 8)
SERVICE: For the support and stabilizing of vertical pipe runs
ORDERING: Specify pipe size, figure number, name and type

Heavy Duty Riser Clamp Figure #82H HEAVY DUTY RISER CLAMP
SIZE RANGE: 2" through 24"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 42)
SERVICE: For the support and stabilizing of vertical pipe runs
ORDERING: Specify pipe size, figure number, name and finish

Riser Clamp Figure #85 RISER CLAMP - COPPER GARD
SIZE RANGE: 1/2" through 6"
MATERIAL: Carbon Steel
STANDARD FINISH: Epoxy CoatedCopper-Gard c/w Zinc Hardware
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 8)
SERVICE: For the support and stabilizing of vertical copper tubing pipe runs.
ORDERING: Specify pipe size, figure number, name and finish

Offset Pipe Clamp Figure #87 OFFSET PIPE CLAMP
SIZE RANGE: 3/4" through 12"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: Designed to support general piping, running from wall or floor. This clamp can be furnished with "L" dimensions to suit field conditions.
ORDERING: Specify pipe size, figure number, name and finish

Extended Pipe Clamp Figure #88 EXTENDED PIPE CLAMP
SIZE RANGE: 3/4" through 8"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: Designed for direct welding of hanger to steel structure
ORDERING: Specify pipe size, figure number, name and finish