Saddles, Shields & Guides

Protection Shield  Figure #69 PIPE COVERING PROTECTION SHIELD
SIZE RANGE: 0 through 30
MATERIAL: Carbon Steel
STANDARD FINISH: Pre-Galvanized
SERVICE: Designed to protect pipe insulation from crushing when used with hangers
ORDERING: Specify shield size, figure number, name and finish
Protection Shield Figure #69H PIPE COVERING PROTECTION SHIELD-HEAVY DUTY
SIZE RANGE: 0 through 30
MATERIAL: Carbon Steel
STANDARD FINISH: Pre-Galvanized
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 40)
SERVICE: Designed to protect pipe insulation from crushing when used with hangers
ORDERING: Specify shield size, figure number, name and finish
Figure #70 PIPE COVERING PROTECTION SADDLE - 1" INSULATION
Figure #71 PIPE COVERING PROTECTION SADDLE - 1 1/2" INSULATION
Figure #72 PIPE COVERING PROTECTION SADDLE - 2" INSULATION
Figure #73 PIPE COVERING PROTECTION SADDLE - 2 1/2" INSULATION
Figure #74 PIPE COVERING PROTECTION SADDLE - 3" INSULATION
Figure #75 PIPE COVERING PROTECTION SADDLE - 4" INSULATION
Figure #76 PIPE COVERING PROTECTION SADDLE - 3 1/2" INSULATION
Figure #77 PIPE COVERING PROTECTION SADDLE - 4 1/2" INSULATION
#255 Pipe Alignment Guide Figure #255 PIPE ALIGNMENT GUIDE
SIZE RANGE: 1" through 16" pipe, 0 - 5" insulation
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: Directing thermal expansion of insulated or non-insulated pipe in the direction permitted by expansion joints or loops
ORDERING: Specify pipe and guide size, insulation thickness, figure number and name
#256 Pipe Alignment Guide Figure #256 PIPE ALIGNMENT GUIDE
SIZE RANGE: 1" through 24" pipe, 0 - 5" insulation
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: Directing thermal expansion of insulated or non-insulated pipe in the direction permitted by expansion joints or loops
ORDERING: Specify pipe and guide size, insulation thickness, figure number and name

 
#520 Pipe Saddle Support Figure #520 PIPE SADDLE SUPPORT c/w SOLID STEM
SIZE RANGE: 2" through 12"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: Designed for use on horizontal or gently sloping pipe lines running close to the floor
ORDERING: Specify pipe size, figure number, name and finish

 
#521 Adjustable Pipe Saddle Support Figure #521 ADJUSTABLE PIPE SADDLE SUPPORT and THREADED COUPLING
SIZE RANGE: 2" through 12"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: Designed for use on horizontal or gently sloping pipe lines
ORDERING: Specify pipe size, figure number, name and finish

 
#192 Adjustable Pipe Support Figure #192 ADJUSTABLE PIPE SADDLE SUPPORT c/w THREADED STEM
SIZE RANGE: 2" through 12"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 38)
SERVICE: Designed for use on horizontal or gently sloping pipe lines where vertical adjustment is required
ORDERING: Specify pipe size, figure number, name and finish

 
#525 Pipe Saddle Support c/w U-Bolt Figure #525 ADJUSTABLE PIPE SADDLE SUPPORT WITH U-BOLT
SIZE RANGE: 4" through 36"
MATERIAL: Carbon Steel, saddle, support and U-Bolt.
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 36, 37)
SERVICE: Designed to be used in conjunction with a base stand to support pipe running close to
the floor. U-Bolt secures pipe to saddle.
ORDERING: Specify pipe size, figure number, name and finish.
Base stand ordered separately. Requires accurate center line of pipe to floor dimension "L".

 
#526 Adjustable Pipe Saddle Support Figure #526 ADJUSTABLE PIPE SADDLE SUPPORT
SIZE RANGE: 2 1/2" through 36"
MATERIAL: Carbon Steel with Cast Iron Reducer
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 38)
SERVICE: Pipe support for horizontal pipe lines where vertical adjustment is required
ORDERING: See specification page
#527 Pipe Saddle  Figure #527 ADJUSTABLE PIPE SADDLE SUPPORT c/w U-BOLT
SIZE RANGE: 2 1/2" through 36"
MATERIAL: Carbon Steel with Cast Iron Reducer
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 37,38)
SERVICE: Designed to be used in conjunction with a base stand to support horizontal pipe.
Straight cut pipe thread on nipple provides adjustability, U-Bolt secures pipe to saddle.
ORDERING: Specify size, figure number and finish. Base stand ordered separately.
Requires accurate center line of pipe to floor dimension "L".
#528 Pipe Saddle Support Kit Figure #528KT ADJUSTABLE PIPE SADDLE SUPPORT KIT
SIZE RANGE: 2" through 16"
MATERIAL: Ductile iron saddle with carbon steel coupling, nipple, and base plate, cast steel reducing coupling, S/S set screws.
STANDARD FINISH: All items listed are HDG except for S/S set screws.
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 36,38)
SERVICE: Designed to support pipe horizontally. Straight cut pipe thread on nipple provides up to 4 1/2" of vertical adjustability.
ORDERING: Specify pipe size and figure number. and finish.
#529 Pipe Saddle Support, c/w u-bolt Kit Figure #529KT ADJUSTABLE PIPE SADDLE SUPPORT, c/w U-BOLT, KIT
SIZE RANGE: 3" through 12"
MATERIAL: Ductile iron saddle with carbon steel coupling, nipple, and base plate, cast steel reducing coupling, S/S set screws.
STANDARD FINISH: All items listed are HDG except for S/S set screws.
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 37,38)
SERVICE: Designed to support pipe horizontally. Straight cut pipe thread on nipple provides up to 4 1/2" of vertical adjustability.
ORDERING: Specify pipe size and figure number. and finish.
#501 Stud Plate Figure #501 STUD PLATE
SIZE RANGE: 3", 4", 6" and 8" lengths
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: To apply to wooden stud to protect plumbing and electrical lines from drywall screws and other fasteners
ORDERING: Specify length, figure number and name