Pipe Stays & Straps

Pipe Stay - Standard Figure #32S PIPE STAY - STANDARD
SIZE RANGE: 1/2" - 2" Copper to 3/8" - 2" Iron Pipe
MATERIAL: Carbon Steel
STANDARD FINISH: Epoxy Coated
SERVICE: Vertical or horizontal offset pipe guide
ORDERING: Specify pipe size, figure number, name and finish.

Pipe Stay - Extended Figure #32E PIPE STAY - EXTENDED
SIZE RANGE:1/2" - 1 1/4" Copper to 3/8" - 1" Iron Pipe
MATERIAL: Carbon Steel
STANDARD FINISH: Epoxy Coated
SERVICE: Vertical or horizontal offset pipe guide
ORDERING: Specify pipe size, figure number, name and finish

Pipe Stay - Double Figure #32D PIPE STAY - DOUBLE
SIZE RANGE:1/2" - 3/4" Copper to 3/8" - 1/2" Iron Pipe
MATERIAL: Carbon Steel
STANDARD FINISH: Epoxy Coated
SERVICE: Vertical or horizontal offset pipe guide
ORDERING: Specify pipe size, figure number, name and finish

Pipe Stay Clevis Figure #32-15 PIPE STAY CLEVIS
SIZE RANGE: For 3/8" threaded rod.
MATERIAL: Carbon Steel
STANDARD FINISH: Electro-Plated Zinc (Yellow Dicromate)
SERVICE: To utilize existing rod supporting other pipes to attach pipe stays
ORDERING: Figure number, name and finish

One Hole Pipe Strap Figure #44 ONE HOLE PIPE STRAP
SIZE RANGE: 1/4" through 2"
MATERIAL: Carbon Steel
STANDARD FINISH: Pre-Galvanized Zinc
SERVICE: For the support of light duty conduit on walls or sides of beams. Not recommended for supporting pipe on ceilings or similar horizontal surfaces
ORDERING: Specify pipe size, figure number, name and finish

2-Hole Pipe Strap Figure #45 2-HOLE PIPE STRAP
SIZE RANGE: 1/2" through 6"
MATERIAL: Carbon Steel
STANDARD FINISH: Pre-Galvanized
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 26)
SERVICE: For the support of light duty conduit on walls or sides of beams.
ORDERING: Specify pipe size, figure number, name and finish

2-Hole Copper Pipe Strap Figure #45C 2-HOLE PIPE STRAP - Copper-Gard
SIZE RANGE: 1/2" through 2"
MATERIAL: Carbon Steel
STANDARD FINISH: Epoxy Coated Copper-Gard c/w Copper Plated Nails
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 26)
SERVICE: For the support of light duty copper tubing on walls or sides of beams.
ORDERING: Specify tube size, figure number, name and finish

2 Hole Pipe Strap Figure #45SS 2-HOLE PIPE STRAP
SIZE RANGE: 1/4"OD through 4"
MATERIAL: Type 304 Stainless Steel
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 26)
SERVICE: Designed as a light duty support for schedule 40/80 sized pipe. Attaches directly to horizontal or vertical structural members.
ORDERING: Specify pipe size or O.D. tubing size and figure number.

Hold Down Clamp Figure #46 HOLD DOWN CLAMP
SIZE RANGE: 1/2" through 24"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 26)
SERVICE: Designed to steady a horizontal run of pipe against a perpendicular section of strut channel or flat surface.
ORDERING: Specify pipe size, figure number, name and finish

Bell (Van) Hanger Figure #129 VAN HANGER - Copper-Gard
SIZE RANGE: 1/2" -2"
MATERIAL: Carbon Steel
STANDARD FINISH: Epoxy Coated Copper-Gard c/w Yellow Zinc Dichromate Screw
FEATURES: Designed to support copper tubing to wall. Supports the pipe 1" from the back of pipe to wall. The wood screw is concealed upon installation.
ORDERING: Specify tube size, figure number, name and finish