Swivel Ring Hangers

Swivel Ring Hanger Figure #41 SWIVEL RING HANGER - Pre-Galvanized
FINISH:Pre-Galvanized c/w Zinc Plated Insert Nut
MATERIAL: Carbon Steel, Stainless Steel (#41 304SS) and (#41 316SS) 1/2" - 4" Only
APPROVALS: ULC, UL and FM. Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 10)
RECOMMENDED: For the suspension of non-insulated, stationary pipe lines allowing for vertical adjustment.
NOTE: ULC, UL, and FM Approvals do not apply to Stainless


Swivel Ring Hanger Figure #41 PVC SWIVEL RING HANGER
FINISH: PVC Coating c/w Zinc Plated Insert Nut
MATERIAL: Carbon Steel
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 10)
RECOMMENDED: For the suspension of stationary glass pipe lines.

 


Swivel Ring Hanger Figure #42 SWIVEL RING HANGER Copper-Gard
FINISH: Epoxy Coated Copper-Gard c/w Zinc Plated Insert Nut
MATERIAL: Carbon Steel
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 10)
RECOMMENDED:  For the suspension of copper tubing, stationary pipe lines allowing for vertical adjustment.


Swivel Ring Hanger Figure #43 SWIVEL RING HANGER - Epoxy Coated
FINISH: Epoxy Coating c/w Zinc Plated Insert Nut
MATERIAL: Carbon Steel
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 10)
RECOMMENDED:  For the suspension of copper or iron stationary pipe lines allowing for vertical adjustment.


Band Hanger Figure #E31 BAND HANGER
FINISH: Bare Metal, Zinc Plated (#E31Z)
MATERIAL: Carbon Steel, Stainless Steel (#E31 304SS) and (#E31 316SS)
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 10)
RECOMMENDED: For the suspension of non-insulated stationary pipe lines allowing for
vertical adjustment. Secure with hex. nuts (not supplied) tightened securely top and bottom.


Swivel Nut Figure #41A ZINC PLATED  SWIVEL NUT
The swivel inserts nuts are available in 3/8" (increments of 100) and 1/2" (increments of 50)