Threaded Accessories

#14 Standard U Bolt Figure #14 U BOLT - Standard Duty BARE METAL
SIZE RANGE: 1/2" through 36"
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 24)
SERVICE: Designed as a support guide, or anchor for heavy loads
ORDERING: Specify pipe size, figure number, name and finish

#14 Standard U Bolt Figure #14Z U BOLT - Standard Duty ZINC PLATED
SIZE RANGE: 1/2" through 36"
MATERIAL: Carbon Steel
STANDARD FINISH: Zinc Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 24)
SERVICE: Designed as a support guide, or anchor for heavy loads
ORDERING: Specify pipe size, figure number, name and finish

#15Z Zinc Hex Nuts Figure #15Z HEX. NUTS - ZINC
SIZE RANGE: 3/8" to 3/4"
MATERIAL: Mild Steel Grade 2
STANDARD FINISH: Zinc Plated
ORDERING: Specify figure number, name and finish

#17W Swivel Rod Extension Figure #17WZ SWIVEL ROD EXTENSION 20°
SIZE RANGE: For 3/8" Threaded Rod
MATERIAL: Mild Steel
STANDARD FINISH: Electro-Plated Zinc
SERVICE: The extension piece, when installed in the hanging assembly, allows for movement up to 20°. Threading at both ends are 3/8"–16 for use with standard threaded rod or hardware. Height adjustable with an inspection hole in collar to check the screw in depth of the threaded rod. Assemblies will hang ‘plumb’ from the pivot point or, where movement is required, the hanging assembly will accommodate.
ORDERING: Specify figure number, name and finish.
 


Hanger Rod With Eye Figure #53 - Hanger Rod with Eye
SIZE RANGE: 2 3/4" through 5"
MATERIAL: Mild Steel
STANDARD FINISH: Bare Metal
SERVICE: A large diameter rod with eye for load ratings through 184,000 pounds.
ORDERING: Specify rod size, figure number, name, length and finish.


Threaded Rod Figure #54 - All Threaded Rod
SIZE RANGE: 3/8"-16 X 10ft through 1 1/2"-6 X 10ft.
MATERIAL: Mild Steel
STANDARD FINISH: Zinc Plated
SERVICE: Useful in applications for attaching hangers to structural attachments.
ORDERING: Specify thread size, grade and finish.


Threaded Hanger Rod Figure #57 and #58 - Machine Threaded Hanger Rod
SIZE RANGE: 3/8"-16 through 5"-4UN.
MATERIAL: Mild Steel
STANDARD FINISH: Bare Metal
SERVICE: Useful in applications for attaching hangers to structural attachments.
ORDERING: Specify rod size, figure number, name, rod length and finish.


#59 Wood Drive Screw Figure #59 WOOD DRIVE SCREW
SIZE RANGE: 12 to 16
MATERIAL: Carbon Steel
STANDARD FINISH: Bare Metal
SERVICE: Designed for fastening attachments to wood beams.
ORDERING: Specify figure number and size.

#60WZ Coach Screw Rod - Socket Drive Figure #60WZ COACH SCREW ROD - SOCKET DRIVE
SIZE RANGE: 3" through 12"
MATERIAL: Mild Steel
STANDARD FINISH: Electro-Plated Zinc
SERVICE: Coach screw rod with a Torx head cavity for smooth and easy installation. Hex pattern in the middle of the screw allows for adjustment with a wrench.
ORDERING: Specify size, figure number, and name.

#62 Rod Coupling Figure #62Z ROD COUPLING
SIZE RANGE: 3/8" through 1 1/2" rod
MATERIAL: Carbon Steel
STANDARD FINISH: Electro-Plated Zinc
SERVICE: Designed for coupling two hanger rods of equal rod size
ORDERING: Specify rod size, figure number, name and finish

#63 Forged Steel Clevis Figure #63 FORGED STEEL CLEVIS
SIZE RANGE: 3/8" through 4" rod size
MATERIAL: Forged Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 14)
SERVICE: Designed for use on high temperature piping installations
ORDERING: Specify figure number, name, size, and pin size

#64 Weldless Eye Nut Figure #64 WELDLESS EYE NUT
SIZE RANGE: 3/8" through 2 1/2" rod size
MATERIAL: Forged Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 17)
SERVICE: Designed for use on high temperature piping applications.
ORDERING: Specify rod size, figure number, name and finish

#65 Eye Socket Figure #65 EYE SOCKET
SIZE RANGE: 1/4" through 7/8" rod size
MATERIAL: Malleable Iron
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 16)
SERVICE: A non-adjustable threaded rod attachment often used with the split ring hanger Fig.# 38R
ORDERING: Specify rod size, figure number, name and finish

#68 Turnbuckle Figure #68 TURNBUCKLE
SIZE RANGE: 3/8" through 2 1/2" rod size
MATERIAL: Forged Steel
STANDARD FINISH: Bare Metal
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 13)
SERVICE: Designed as an adjustable hanger rod connection
ORDERING: Specify rod size, figure number, name and finish

#114 Turnbuckle Adjuster Figure #114 TURNBUCKLE ADJUSTER
SIZE RANGE: 3/8" through 1/2" rod size
MATERIAL: Mealleable Iron
STANDARD FINISH: Bare Metal, Copper Plated
APPROVALS: Complies with Manufacturers' Standardization Society MSS SP-58 and SP-69 (Type 15)
SERVICE: Designed to provide vertical rod adjustment with spit ring hangers.
ORDERING: Specify rod size, figure number, name and finish


#411 Extension Piece Figure #411 EXTENSION PIECE
SIZE RANGE: 3/8" through 7/8" rod size
MATERIAL: Malleable Iron
STANDARD FINISH: Bare Metal
SERVICE: Designed for attaching a hanger rod to various building attachments.
ORDERING: Specify rod size, figure number, name and finish